Maximum working temperature :
140°C
Maximum working pressure :
6 kg/cm²
Heating Rate :
20°C - 130°C approx 30 min (Saturated steam pressure 7 kg/ cm²)
Cooling Rate :
130°C - 80°C approx 20 min (Cooling water at 3 kg/cm²)

Machine body and major wet parts made of materials 316L highly corrosion resistance stainless steel.

Cone Dyeing Machine with Air Pad System

HT/HP is a versatile dyeing machine for treating material in various forms. The range starts from 10 kg to 100 kg designed for high operation temperature 140°C and pressure 5 bar.

The dyeing machine and all wetted parts are made of AISI 316/316L highly corrosion resistant stainless steel.

1. Circulation Pump: Heavy duty stainless steel centrifugal pump with high flow rate. (Inverter drive can be supplied on request).
2. Reversal Flow : Liquor flow direction is reversed automatically at preset time intervals from in side out to out side in and vice versa according to requirement.
3. Liquor Ratio : Programmable and adjustable in range from 1:4 to 1:7
4. Air Pad System : By compress air static pressure is obtained and system is pressurized. Material carriers are fully flooded in the dye vat.
5. Heat Exchanger : In direct heating and cooling coil is provided for rapid rise in temperature up to 4°C/min at steam pressure of 7 kg/cm². Heating of liquor is homogenous.
6. Service Tank : A service tank is provided for feeding dye staff and chemicals to the dye vat by means of a dosing pump. At top perforated pipe is fitted for washing of walls.
7. Control Panel : Microprocess programmer for different type of material is provided or you may feed the new program as per your dyeing cycle.